All-in-one Table Top
All in one solution
The all-in-one residential energy storage solution (ESS) delivers seamless and intelligent power management for modern
homes. Engineered for exceptional reliability and performance, it combines a hybrid inverter, scalable lithium iron
phosphate (LiFePO4) battery technology, and advanced energy optimization features into a single, integrated system.
KEY FEATURES
Integrated solution
All-in-one design with hybrid inverter and modular battery storage.
Life Cycle
3000+ charge cycles with a 5-year warranty.
Superior durability & safety
Supports peak shaving, scheduled charging, and other grid services using safe, long lasting lithium iron phosphate (LFP) battery chemistry.
Installation
Wall-mounted or tabletop configuration for flexible setup and reliable backup power during outages.
Technical Specifications
| Parameter | Rating |
|---|---|
| Model Number | 2000VA/25.6 |
| Nominal DC Voltage (V) | 25.6 |
| MPPT Charger | |
| Type of Charger | MPPT |
| No of MPPT Channels | 1 |
| Max. Connected PV Modules kW | 2.2 |
| Max MPPT Output Current / Max Battery Charging Current (A) | 70 |
| Max. Open Circuit PV Voltage (V) | 110 |
| MPPT Voltage Range (V) | 35–88 |
| MPPT Peak Efficiency | >94% |
| Solar Inverter | |
| Input Power at Peak Load (W) | 2200 |
| Nominal Output Voltage (V) | 220 |
| Nominal Output Frequency (Hz) | 50 |
| Output Supply Phase | Single Phase |
| Overloads |
100–125% – 120Sec 126–150% – 60Sec 151–200% – 5 Sec >200% – Immediate |
| Output Type | Pure Sine Wave |
| Input Source | PV/Battery/Grid |
| Peak Inverter Efficiency | >85% |
| THD | >5% |
| Load Power Factor | 0.8 |
| Battery | |
| Battery (Ah)/(Voltage V) | 100/25.6 |
| Battery (Wh) | 2560 |
| Charging Current (A) | 30 |
| Discharging Current (A) | 50 |
| Max Continuous Discharging Current (A) | 100 |
| Battery Under Cut Alarm (V) | 24.2 (Settable) |
| Battery Under Cut (V) | 24 (Settable) |
| Float Charging Voltage (V) | 28.8 |
| Boost Charging Voltage (V) | 28.8 |
| Grid Charger | |
| Grid Operating Voltage Range (V) | 120–280 |
| Grid Frequency Range | 47–53 |
| Ambient Conditions | |
| Operating Temp (°C) | 0–50 |
| Humidity | 95% |
| Degree of Protection | IP 20 |
| Cooling Method | Temp. Controlled FAN Force Cooling |
| Display/Indication | |
| Protections |
PV – Reverse Polarity, High Current Battery – Reverse Polarity, Under Voltage Cut, Over Voltage Cut Grid – Over/Under Voltage, Over/Under Freq., Surge Protection, Reverse Feed Protection Load – Overload, Short Circuit |
| Display Parameters |
PV: Voltage, Amps, Power, Today KWH, Total KWH Generation. Battery: Voltage, Amps, Charge/Discharge Status Grid: Voltage, Frequency Load: Voltage, Load%, Frequency. Load Operating Modes (UPS/Wide Range), Priority Selection, Grid Charging Enable/Disable, Battery Status (Charging/Discharging) |
| Display Faults |
PV: PV Over Voltage Battery: Battery Under Voltage, Battery Over Voltage Grid: Back Feed, Under/Over Voltage, Fuse Fail Load: Overload, O/P Short Circuit |